[novawolfMember]

I NEED TO KNOW WHAT SCREW DRIVER I NEED TO CUSTOMIZE. >:(please help me.

[AdminKeymaster]

A triangle head… There's a link to Amazon that has one somewhere, don't know where. Google it.

[AdminKeymaster]

Triangle head. That's what kind of screws they have in them.

[AdminKeymaster]

I NEED TO KNOW WHAT SCREW DRIVER I NEED TO CUSTOMIZE. >:(please help me.

well, you could customize this if it wasn't too much troublehttp://www.instructables.com/id/Screwdriver_with_triangular_head/but, if you don't wanna do that you could always heat up a bic pen in the microwave untill it was soft and stick the tip into the screw to make a mold.or lastly, you can just get a flat head screwdriver to grip 2 edges of the screw..hope i helped.

[Darkus BrawlerMember]

I NEED TO KNOW WHAT SCREW DRIVER I NEED TO CUSTOMIZE. >:(please help me.

well, you could customize this if it wasn't too much troublehttp://www.instructables.com/id/Screwdriver_with_triangular_head/but, if you don't wanna do that you could always heat up a bic pen in the microwave untill it was soft and stick the tip into the screw to make a mold.or lastly, you can just get a flat head screwdriver to grip 2 edges of the screw..hope i helped.

I had to use a flathead to open my spin ravenoid, it was actually too big but somehow I managed to put a notch in the screw and it turned. I didn't know about the bic though... Would that leave ink on the screw? And how would you put it in the MICROWAVE? It'd catch on fire and turn to ash before it melted. Have you actually tried that, or did you hear it somewhere?

[AdminKeymaster]

LMAO! forgot to add that you rip

[Darkus BrawlerMember]

LMAO! forgot to add that you rip

[AdminKeymaster]

hehe. i said the microwave thing in the first place cuz thats what i heard from someone else. hehe i should've explained my way.

[Author]

Posts