[AdminKeymaster]

Ok I got a Crystal Verias and its leg's spring wasn't tight enough so it hung lower than the other one so I took a knife and tightened the spring and now it better.I also got a Haos Hylash and one of the spikes wasn't even with the rest of them so I stuck my pocket knife in the slit and made it beigger and now Hylash's spikes r all even and perfect!Post here if u ever had a flaw in a bakugan and u were able to fix it!

[SwaveMember]

I have so many I will only list the major one, my Ventus Reaper is missing a screw, I didn't notice until I rolled really hard one time, and he exploded, I was able to fix him easy, and hasn't come apart since, unless it was on purpose

[AdminKeymaster]

XD WOW! Anyways theres always something I need to fix! I had to raise Neo Drago's head to match the rest of mine!

[DarkusSerpenoid354Member]

I haven't fixed it yet (or even attempted to), but my Pyrus Hades' neck goes back too far. Actually, it just doesn't spring back up like most do. Instead of just fixing the problems, you should write to SM and see if you can get free Bakugan. That's probably what I will try to do, but I would like to see inside of some Bakugan I don't care much about, like my Darkus B2 Griffon…

[Sub-Terra DudeMember]

I got a BakuSteel Haos Alto Brontes and one of the arms' springs wasn't tight. So I unscrewed the screw holding the arm in, (The first attempt I was pushing so hard to get it unscrewed I slipped and jabbed myself with the screwdriver and almost needed stitches) I tightened the spring, (VERY hard to keep it tight the entire time you put all the pieces back on) put everything back together, and screwed it back into place.(screwing it back in was 9000 times easier than unscrewing it). The only thing is now the OTHER arm is loose somehow. I tried unscrewing it to try to fix it like the other but stabbed myself AGAIN with it, this time not so severely. I didn't try again.

[DarkusSerpenoid354Member]

I got a BakuSteel Haos Alto Brontes and one of the arms' springs wasn't tight. So I unscrewed the screw holding the arm in, (The first attempt I was pushing so hard to get it unscrewed I slipped and jabbed myself with the screwdriver and almost needed stitches) I tightened the spring, (VERY hard to keep it tight the entire time you put all the pieces back on) put everything back together, and screwed it back into place.(screwing it back in was 9000 times easier than unscrewing it). The only thing is now the OTHER arm is loose somehow. I tried unscrewing it to try to fix it like the other but stabbed myself AGAIN with it, this time not so severely. I didn't try again.

Wow. I would just ignore it or buy another if that happened to me. My Core Alto Brontes' magnet-latch-thing kept getting stuck (I would take it off of the card, but the latch wouldn't spring back up), so I just moved it back and forth to wear it down a little, so it would spring back. If it continues, I might have to take some sandpaper to it...

[AdminKeymaster]

My Core Aquos Abis Omega's head is slightly back further than my other 2! It annoys the crap out of me!

[SwaveMember]

XD WOW! Anyways theres always something I need to fix! I had to raise Neo Drago's head to match the rest of mine!

My Darkus ND is like that, but their is different molding on it from my other one

[Spin HydranoidMember]

When I was crazy about Haos (this was when B1's were out), I got a Haos Gorem, then when NV came out, Its magnet CAME OUT. Beofre that happened, it would always attract other Bakugan's magnet's so it's magnet was flipped. I might just call or email SM to see if I can get another one.

[jgd1996Member]

my midnight percivals legs are very loose

[vakusoMember]

my ventus viper helios magent is weak

[Author]

Posts