Learn How To Get A
Guaranteed 700g Bakugan!
Watch Bakugan
Character Profiles
Bakugan Store
Sign up for our newsletter above , we'll occasionally send you the latest Buzz on all things Bakugan!
  • Categories
  • Bakugan Buzz Partners


  • Rolling Bakugan



    This topic contains 3 replies, has 0 voices, and was last updated by Profile photo of ShadowSkyress ShadowSkyress 16 years, 3 months ago.

    Viewing 5 posts - 1 through 5 (of 5 total)
    • Author
      Posts
    • #218182

      I found a way to Spin(roll) bakuganFirst,put down your bakugan on the metal piece so it stands stillThen,make your hand that you like to use(I'm RH but my LH rolls better)look like a knife so it is flatSkim the bakugan's with your "knifehand"It should roll!!Hope it worked with you!!!

      #243465
      Profile photo of Admin
      Admin
      Keymaster

      If you put it on metal, it will pop open, so it doesn't realy wok. Also, here's a batter way. Take the Bakugan and put it so the magnet faces down. Then, push down on it while pushing forward on it at the same time. It works every time.

      #243514
      Profile photo of imported_Yoshipatrol
      Yoshipatrol
      Member

      I either just toss mine or spin it on the magnet depending on the situation. Tossing it is for getting it on further cards, just toss it so it spins verticallySpinning it is for closer cards and it will almost always open the Bakugan if you touch the gate card.

      #243522
      Profile photo of Admin
      Admin
      Keymaster

      I just roll it… And hope it lands on the right card XD

      #243626
      Profile photo of Smeargle2
      Smeargle2
      Member

      If you put it on metal, it will pop open, so it doesn't realy wok. Also, here's a batter way. Take the Bakugan and put it so the magnet faces down. Then, push down on it while pushing forward on it at the same time. It works every time.

      By putting it on metal, he probably means setting it down on it's magnet.

    Viewing 5 posts - 1 through 5 (of 5 total)

    You must be logged in to reply to this topic.

    Comments are closed.