[AdminKeymaster]

I have a lot of bakugan that when I first buy them they are falty in some way, but mostly all of them are loose some way. I never had a problem with that, but now my favorite bakugan witch is my first bakugan ever my B1 pyrus drago has become loose and I would die if it got even more messed up. How can I make my loose bakugan tighter? Someone plz help

[BakuexpertMember]

Easy, screw the loose place with a triangle-headed screwdriver or a flat-headed screwdriver. And if the bakugan has unnecessary plastic pointed out which blocks the opening or closing, use a sand paper or a file.

[AdminKeymaster]

Easy, screw the loose place with a triangle-headed screwdriver or a flat-headed screwdriver. And if the bakugan has unnecessary plastic pointed out which blocks the opening or closing, use a sand paper or a file.

don't want to sound dumb or anything, but what do you mean by screw the loose place? As in open the bakugan and use I screwdriver and tighten the insides? Or tighten the screws from the outside?

[omegadragonoidMember]

Tighten the screws from outside.

[AdminKeymaster]

Tighten the screws from outside.

Ok thanx for the tip, but how will that tighten the bakugan?

[omegadragonoidMember]

Tighten the screws from outside.

Ok thanx for the tip, but how will that tighten the bakugan?

It tightens the loose parts...

[AdminKeymaster]

Tighten the screws from outside.

Ok thanx for the tip, but how will that tighten the bakugan?

It tightens the loose parts...

lol yeah I should have known that. I ask because the wing where the pyrus symble is at that's where it's loose and now the head it's loose and since the screw is at yha bottom part of the bakugan I was thinking how is that going to make the wing and head less loose.

[Author]

Posts