Learn How To Get A
Guaranteed 700g Bakugan!
Watch Bakugan
Character Profiles
Bakugan Store
Sign up for our newsletter above , we'll occasionally send you the latest Buzz on all things Bakugan!
  • Categories
  • Bakugan Buzz Partners


  • how to protect your ablity and gate cards?



    This topic contains 13 replies, has 0 voices, and was last updated by Profile photo of infinitehope infinitehope 16 years, 8 months ago.

    Viewing 15 posts - 1 through 15 (of 15 total)
    • Author
      Posts
    • #216887
      Profile photo of infinitehope
      infinitehope
      Member

      both how to protect and how to diferante them, the cards are too big for normal card sleeves… i saw mentioned toploaders, what size? etc? ideas?

      #227385
      Profile photo of Admin
      Admin
      Keymaster

      They fit in the clear plastic toploaders, at least the ones i have. I dont think there are special sizes , just the normal ones

      #227389
      Profile photo of infinitehope
      infinitehope
      Member

      ok, i guess to make them be “mine” i could put in color sleeves on the back… for gate cards, do the magnets still work on top of toploaders… i'd guess your oppenent would have to use them as well..

      #227441

      I've always been really anal about the condition of my collections and stuff.. but with Bakugan, that kind of all flew out the window. There is no reason and no sense to keep these things in perfect condition if you actually play. Heck even some of my Bakugan have "battle scars".But they will be making sleeves and stuff specifically for Bakugan now, so it's just a matter of time.

      #227442
      Profile photo of Admin
      Admin
      Keymaster

      the cards come right out of the packages all bent and banged up… pretty hard to get a mint card

      #227443

      the cards come right out of the packages all bent and banged up... pretty hard to get a mint card

      Exactly... XDNot to mention they're always printed differently.. either different shades of coloring or different finishes.. I've even gotten cards that were bent inside the package.I think that's other reason they covered up the magnet hole on the newer Bakugan too though. The holes always put dings on the cards.

      #339488
      Profile photo of Admin
      Admin
      Keymaster

      EPIC REVIVAL!I also found out that For super protection you can put your card in a card sleee than put in a binder.

      #258286

      i also suggest laminating them…. that's what i done to perserve my Lightning Storm gatecard after the waxer incident.

      #258277
      Profile photo of Shedinja123
      Shedinja123
      Member

      Good idea. I might try that!

      #257892
      Profile photo of sooners1223
      sooners1223
      Member

      BakuBinder. Nuff said.

      #345592
      Profile photo of imported_Kohdok
      Kohdok
      Member

      Well, the binder and sleeves are only really good for preservation and identification, as there really is no advantage to marking your cards (It only helps your opponent since you have all of your cards in your hand). The condition of the cards has little impact on gameplay.If you want your sleeves to stand out, go ahead and mark all over them.

      #345654
      Profile photo of Num1Rocker
      Num1Rocker
      Member

      i just use card sleeves for mine, but cant

      #345657
      Profile photo of brawl4life
      brawl4life
      Member

      Mhm, I use card sleeves.Not only do they protect them,, but it makes brawls easier. At least for me. ;D

      #345676

      I really should protect them in a sleeve, not saying I have any cards I broke, my piercian card came bent

      #346126
      Profile photo of Bakuexpert
      Bakuexpert
      Member

      All of my gate cards came bent….Unlucky that I have NO card sleeves(except Yu-Gi-Oh's sleeves…)

    Viewing 15 posts - 1 through 15 (of 15 total)

    You must be logged in to reply to this topic.

    Comments are closed.