Help with a Percival custom!

This topic contains 18 replies, has 0 voices, and was last updated by Admin 15 years, 11 months ago.

Viewing 15 posts - 1 through 15 (of 20 total)

1 2 →

Author

Posts
November 8, 2009 at 4:00 pm #222196

Admin
Keymaster

Ok I am taking apart my percival and making it rotatable but how will I shorten the metal pegs?

November 8, 2009 at 4:13 pm #329989

pyrusmetru
Member

dont know but its probly imposible

November 8, 2009 at 4:14 pm #329991

Admin
Keymaster

dont know but its probly imposible

Not impossible. Someone on here did it with a Neo Drago! Neo Drago has those same pegs!

November 8, 2009 at 4:18 pm #329992

Admin
Keymaster

how about you just don't do a percival custom?

November 8, 2009 at 4:20 pm #329993

eclipse116
Member

how about you just don't do a percival custom?

^this.

November 8, 2009 at 4:20 pm #329994

Admin
Keymaster

how about you just don't do a percival custom?
^this.

November 8, 2009 at 4:24 pm #329850

pyrusmetru
Member

whoever said they did it with neo drago was lieing i have tried to make one too but it never worked

November 8, 2009 at 4:39 pm #330003

Smeargle2
Member

Justin, those two pegs are the hole for the screws that hold him together. They can be sanded down with sand paper, but I'm not sure if you'd be able to put it back together.

November 8, 2009 at 4:52 pm #330011

Admin
Keymaster

Justin, those two pegs are the hole for the screws that hold him together. They can be sanded down with sand paper, but I'm not sure if you'd be able to put it back together.

The metal pegs?

November 8, 2009 at 5:09 pm #330038

Smeargle2
Member

Justin, those two pegs are the hole for the screws that hold him together. They can be sanded down with sand paper, but I'm not sure if you'd be able to put it back together.
The metal pegs?

Metal pegs? My Neon Ventus one doesn't have any. Also, I spin-rolled it onto a gate card without the screws, and here are my results:1/3 of the time, it rolls normally, opens normally.1/3 of the time, the top half pops off when it rolls onto a card.1/3 of the time, the top half spins like a normal spin Bakugan.However, there is a set amount of power you should spin it with, so practice and skill can help you control the outcome better.

November 9, 2009 at 12:36 am #330620

eclipse116
Member

whoever said they did it with neo drago was lieing i have tried to make one too but it never worked

I DID NOT lie!!!

November 9, 2009 at 12:38 am #330623

darkushades
Member

whoever said they did it with neo drago was lieing i have tried to make one too but it never worked
I DID NOT lie!!!

November 9, 2009 at 1:02 am #330668

eclipse116
Member

Here's the topic with my custom neo.

November 9, 2009 at 1:32 am #330203

pyrusmetru
Member

dont know but ive tried it also i would like to see this on a vid

November 9, 2009 at 1:35 am #330730

eclipse116
Member

dont know but ive tried it also i would like to see this on a vid

TOO BAD! >:( >:(I don't have a video camera!!!
Author

Posts

Viewing 15 posts - 1 through 15 (of 20 total)

1 2 →

You must be logged in to reply to this topic.

Comments are closed.

BAKUGAN BUZZ

Help with a Percival custom!