Best Tool to dismantle a bakugan.

This topic contains 10 replies, has 0 voices, and was last updated by BakuganRy 16 years, 2 months ago.

Viewing 12 posts - 1 through 12 (of 12 total)

Author

Posts
July 31, 2009 at 11:14 pm #218864

BakuganRy
Member

what is the best tool you can use that can push the metal pins that connect some of the bakugan parts? I want to dismantle 1 bakugan but I want to avoid damaging the bakugan while pushing the pins out.

July 31, 2009 at 11:28 pm #263945

Admin
Keymaster

pins?

July 31, 2009 at 11:32 pm #263947

Silent Naga
Member

I multiple tools, because it's really hard to get the pins out sometimes.I use a pencil because of the long tip (You're gonna have to keep sharpening it because the tip will keep breaking)I also use a pen, hold down the clicker button thing (XD)

July 31, 2009 at 11:45 pm #263950

BakuganRy
Member

I multiple tools, because it's really hard to get the pins out sometimes.I use a pencil because of the long tip (You're gonna have to keep sharpening it because the tip will keep breaking)I also use a pen, hold down the clicker button thing (XD)

August 1, 2009 at 12:09 am #263962

Admin
Keymaster

I multiple tools, because it's really hard to get the pins out sometimes.I use a pencil because of the long tip (You're gonna have to keep sharpening it because the tip will keep breaking)I also use a pen, hold down the clicker button thing (XD)

August 1, 2009 at 1:16 am #263989

Admin
Keymaster

I have a screw driver thats the size of a needle!

August 1, 2009 at 1:44 am #263996

Obito
Member

this isnt for the pins but i can open the screws with my scissors with ease.

August 1, 2009 at 2:14 am #264011

BakuganRy
Member

I think I found the right tools. I remember the type of screwdrivers watch repairmen use. They are very small in size and should allow you to push the pins with ease.

August 1, 2009 at 3:36 am #264030

HaosMaster
Member

what is the best tool you can use that can push the metal pins that connect some of the bakugan parts? I want to dismantle 1 bakugan but I want to avoid damaging the bakugan while pushing the pins out.

If you look at my reviews I have a small screwdriver that I use.

August 5, 2009 at 6:38 pm #266016

danielybakugan
Member

sharp tip

August 5, 2009 at 6:46 pm #266024

Kiohl
Member

what is the best tool you can use that can push the metal pins that connect some of the bakugan parts? I want to dismantle 1 bakugan but I want to avoid damaging the bakugan while pushing the pins out.
If you look at my reviews I have a small screwdriver that I use.

August 20, 2009 at 4:32 am #272468

Sub-Terra Dude
Member

ive been looking and looking on eBay to find a triangle screw driver but all i got was tri wing screwdrivers.
Author

Posts

Viewing 12 posts - 1 through 12 (of 12 total)

You must be logged in to reply to this topic.

Comments are closed.

BAKUGAN BUZZ

Best Tool to dismantle a bakugan.