Alto brontes on bakugan.com

This topic contains 12 replies, has 0 voices, and was last updated by eclipse116 16 years, 3 months ago.

Viewing 14 posts - 1 through 14 (of 14 total)

Author

Posts
November 7, 2009 at 6:06 am #222129

eclipse116
Member

This alto brontes doesn't have a rim sticking out...any thoughts?

November 7, 2009 at 6:09 am #328568

vakuso
Member

the small base probably didnt stand to well on its own so they decided to go with a bigger base. that's what i think.

November 7, 2009 at 6:11 am #328426

eclipse116
Member

the small base probably didnt stand to well on its own so they decided to go with a bigger base. that's what i think.

Good point vakuso.

November 7, 2009 at 6:36 am #328695

Obito
Member

they could have just made it equal size with the top half..and i like that one, it looks more colourul

November 7, 2009 at 6:47 am #328697

vakuso
Member

the small base probably didnt stand to well on its own so they decided to go with a bigger base. that's what i think.
Good point vakuso.

November 7, 2009 at 6:48 am #328698

Obito
Member

i reckon maybe it still could stand if you made the base the exact same size.. and anyways the couldve put a stabilising peg at the back.

November 7, 2009 at 4:35 pm #319017

sooners1223
Member

Hopefully hes not a prototype. Thats the sickest looking Alto Brontes Ive ever seen.

November 7, 2009 at 4:52 pm #328832

DarkusSerpenoid354
Member

Hopefully hes not a prototype. Thats the sickest looking Alto Brontes Ive ever seen.

Definitely, especially with the detailings.

November 7, 2009 at 5:12 pm #328854

Admin
Keymaster

Another difference is my Alto Brontes leans forward a tad bit. The one in the pic does not! ???

November 7, 2009 at 5:13 pm #328856

Admin
Keymaster

Another difference is my Alto Brontes leans forward a tad bit. The one in the pic does not! ???

That may just be yours, since mine doesn't do thatYours might just have a weak spring.

November 7, 2009 at 5:13 pm #328857

Admin
Keymaster

I already posted this, eclipse.

November 7, 2009 at 5:14 pm #328861

Admin
Keymaster

Another difference is my Alto Brontes leans forward a tad bit. The one in the pic does not! ???
That may just be yours, since mine doesn't do thatYours might just have a weak spring.

No its the thing that is controlling how far it goes!

November 7, 2009 at 5:15 pm #328862

Admin
Keymaster

Another difference is my Alto Brontes leans forward a tad bit. The one in the pic does not! ??? That may just be yours, since mine doesn't do thatYours might just have a weak spring.
No its the thing that is controlling how far it goes!

Again, just yours, since mine does not do that.

November 7, 2009 at 5:22 pm #328872

Admin
Keymaster

FIXED! I took a knife to it and now it stands straight up and down. Strange. I just had to fix a newer mega Brontes. They changed the spring design and it came undone so I wrapped the spring around the screw holder and then glued it.
Author

Posts

Viewing 14 posts - 1 through 14 (of 14 total)

You must be logged in to reply to this topic.

Comments are closed.

BAKUGAN BUZZ

Alto brontes on bakugan.com